SW80 series is designed for direct current loads, particularly motors as used on small electric vehicles, such as light industrial trucks. The range comprises: Single Pole, on/off types (SW80), Double Pole, on/off types (SW82), Single Pole normally closed types (SW85) and paired versions of these for motor reversing (SW822, SW88 and DC88 types) Coil Voltages ranging from 6 to 240 DC are available. (AC rectifier option available). Options: Auxiliary Microswitch, Magnetic Blowouts, Environmental Protection, Closed Contact Housing, Large Contact Tips, Textured Tips
SW80P, This is a specific version from the SW80 series. The "P" is for protection. All types can be fitted with closed contact housings as a low cost option to provide against environmental dust. However, special versions of the DC88, DC92, SW80, SW82, SW85 and SW822 contactors are available which are protected to IP66 against particularly adverse environments such as water spray, airborne dust, etc. These contactors, which have the suffix "P" are sealed in an inert plastic case and are fitted with mounting brackets
SW80AB, This is a specific version from the SW80 series. "A" double circuit normally open, normally closed microswitch can is fitted to this version, which has a DC resistive rating of 5 amperes at 24V. Auxiliary contacts cannot be fitted to SW82 or SW822. "B" The single pole types (excluding 'P' versions) can be fitted with permanent magnet blowouts. These enable the contacts to switch D.C. voltages of 48 or higher. Fitting of blowouts makes the contacts polarity sensitive and the Positive markings on the top cover of the contactor must be observed.
SW82, This is a specific version from the SW80 series. Double Pole Single Throw. Thermal current rating UP to 100 amperes. M8 Main terminals. Options: Magnetic Blowouts, Environmental Protection, Closed Contact Housing, Large Contact Tips, Textured Tips
DreamSoft